Nothing makes a new car look better than a matching
set of high quality floor mats!
Stripe
Package
Black with Silver Accent
Add visual punch to your Corvette with a
race-inspired stripe package. Designed to highlight
the center section of the vehicle.
JL Audio
Corvette ZR650-CSi 2-Way Component Systems
This
new range of reference component systems fully demonstrates
JL Audio’s obsession with accurate sound reproduction. Each
step of the ZR development process was driven by the goal to
create a mobile sound experience like none before. Through
the implementation of proprietary technologies and intense
optimization of mechanical, electromagnetic and filter
systems, ZR raises the bar for automotive speaker
performance.
PART #
DESCRIPTION
RETAIL PRICE
OUR PRICE
BUY
ZR650-CSi
ZR650-CSi
2-Way Component Systems
$799.98
$599.00
ZR650-CSi 2-Way Component Systems Specifications:
ZR650-CSi 2-Way Component
Systems
Description:
Evolution™ ZR 6.50 in. / 160 mm 2-Way Component
Systems:
6.50 in. / 160 mm Woofers; 1.0 in. / 25 mm Aluminum
Dome Tweeters
This new range of reference component systems fully
demonstrates JL Audio’s obsession with accurate
sound reproduction.
Woofers:
Custom-engineered, proprietary cast aluminum woofer
baskets were designed to provide maximum rear open
area while also incorporating JL Audio’s patented
“Elevated Frame” cooling system. This cooling
technology, shared with JL Audio’s W7 subwoofers,
allows air to flow directly across the top-plate and
onto the voice coil windings to greatly improve
linearity at all listening levels.
Tweeters:
1.0 in. / 25
mm aluminum dome tweeter
Crossover Networks:
All of these
quality components are enclosed in a newly designed,
polycarbonate case with a classy metal “ZR” logo
that will look at home in any high-end installation.
Continuous Power Handling:
85W Continuous
System Efficiency:
89.5 dB @
1W/1m
System Nominal Impedance:
4 ohms
System Frequency Response:
48 Hz - 25 KHz
± 3 dB
NOTES: Front speakers require custom
adaptors for installation in C6
Corvette.
ZR650-CSi 2-Way
Component Systems Physical Specifications :
WOOFER PHYSICAL
SPECIFICATIONS
Woofer Frame Outer Diameter* (A)
6.52 in. /
165.6 mm
Woofer Grille Tray Outer Diameter** (B)
6.76 in. /
171.7 mm
Woofer Magnet Outer Diameter (C)
3.54 in. / 90.0
mm
Frontal Coaxial Tweeter Protrusion*** (D)
N/A
Woofer Frontal Grille Protrusion**** (E)
0.98 in. / 24.9
mm
Woofer Mounting Hole Diameter (F)
5.56 in. /
141.3 mm
Woofer Mounting Depth (G)
2.65 in. / 67.3
mm
*Does not take into
account mounting tabs
**Does not take into account logo badge
***Frontal coaxial tweeter protrusion measured from
mounting surface
****Frontal grille protrusion measured from mounting
surface
TWEETER PHYSICAL
SPECIFICATIONS
Flush Mount Fixture Diameter (A)
1.90 in. / 48.3
mm
Flush Mount
Trim-Ring Diameter (B)
2.13 in. / 54.0
mm
Flush Mount Mounting Hole Diameter (C)
1.66 in. / 42.1
mm*
Flush Mount Mounting Depth (D)
0.453 in. /
11.5 mm*
Surface Mount Fixture Diameter (E)
1.82 in. / 46.2
mm
Surface Mount Protrusion (F)
0.85 in. / 21.6
mm
* Enhanced Flush Cup
Mounting Hole Diameter is 1.72 in. / 43.5 mm and
Enhanced Flush Cup Mounting Depth is 0.404 in. /
10.3 mm
CROSSOVER PHYSICAL
SPECIFICATIONS
Height (A)
5.84 in. /
148.2 mm
Width (B)
4.17 in. /
105.8 mm
Depth (C)
1.72 in. / 43.7
mm
A DIVISION OF DISTINCT AUTOSPORTS, LLC -
WWW.DISTINCTAUTOSPORTS.COM
This
new range of reference component systems fully demonstrates
JL Audio’s obsession with accurate sound reproduction. Each
step of the ZR development process was driven by the goal to
create a mobile sound experience like none before. Through
the implementation of proprietary technologies and intense
optimization of mechanical, electromagnetic and filter
systems, ZR raises the bar for automotive speaker
performance. 
